Tag Archives: Tools

World (and Lunar) Domination – 2012 in review


The WordPress.com stats helper monkeys prepared a 2012 annual report for this blog.

Here’s an excerpt:

19,000 people fit into the new Barclays Center to see Jay-Z perform. This blog was viewed about 81,000 times in 2012. If it were a concert at the Barclays Center, it would take about 4 sold-out performances for that many people to see it.

Click here to see the complete report.

So, now what? (Customizing my New York Pro, finally.)


So, this past weekend, I finally got a chance to work on customizing my New York Pro, I thought I’d get a bunch of it done all at one time.  Well, I hit a roadblock or two as I was taking it all apart.  (Of course.)

I already got some great advice via Facebook, but thought I’d try & chronicle everything here.

It doesn't fit...

It doesn’t fit…

Once I got my work bench set up on the basement, taking everything apart was quite easy.  I just took out all the hardware, and when I went to line up the new pickguard, it didn’t fit. It’s really close, but it doesn’t fit.  I’m going to have to file or cut or sand or Dremel or some combination of all of the above.

It's not the same...

It’s not the same…

The holes in the pickguard aren’t going to lineup with the screws, either.  I’m going to have to maybe 2-sided tape it in place to mark all the holes once I get it cut right.  I have no experience taking apart guitars, but it’s odd that the neck doesn’t fit “perfectly” into the body.  There’s a weird gap there.  It’s also easy to tell (now) that the old pickguard has been cut.  There are some other spots where it doesn’t quite line up.  I hope I don’t have to route anything out where the pickups go.  I got them all from the same place, so I hope not.

Also, I thought I was taking the neck plate off… but it wasn’t having it:

That's supposed to come off when you take the screws out...

That’s supposed to come off when you take the screws out…

Help?

Help?

It’s stuck.  I feel like it’s glued on or was put on before the stain dried?  I bought all black hardware, including a neck plate.  Should I try to get this one off, or just let it go?  I even tried to pop it off using  a screwdriver through the 5th larger hole… all to no avail.

Any advice on that one?

If you’re interested in checking out my progress, take a look at the Photobucket album that’s my attempt to chronicle the whole thing.  (Or, sit through this slideshow…)

Goofy Little 9V Amplifier Project…


I have a Fender Mini Twin MT-10 9V amp that I recently dug out of a box in the basement. Obviously I don’t use it much. It’s the one in a plastic enclosure, and it sounds like… it’s in a plastic enclosure. The battery compartment cover has decided to move on to better things.  My little Smokey Amp kicks its butt where 9V rocking is concerned, and it drives a cabinet if you wanna get really crazy.

Fender Mini-Twin '57 & MT-10

I have the boring MT-10 on the right in the incredibly awesome sounding high-quality black plastic enclosure.

Artistic Amplification | Duck Guitar Amp ($125.00)

If it looks like a duck, and sounds like a cat getting its tail pulled, it must be a... guitar amplifier?

One of the clamps inside that was supposed to hold the speaker busted off of the plastic enclosure anyway, so it was all in there rattling around.

I have been a fan of the stuff that the dude from Artistic Amplification is doing for a while.  The other day I got the brainstorm to turn my Mini-Twin into something like that dude does.  He uses the Ruby circuit from Runoof Groove, but I already have guts to a perfectly good amp.

9-Volt Battery Connector

9V me!

All I need is one of those 9V battery connector things (the amp has a stupid box w/ prongs), a fun shell, maybe some longer wires, a drill, some time and I’m good to go.  Even my level of poor soldering skills should work for this venture.

I was thinking something neat and goofy like a skull model or a Darth Vader helmet would be cool…

Vader Mask / Skull Model

These would certainly make badass little novelty amps.

I could possibly route out the eyes of the skull for the Twin Speaker placement.  Was thinking the same with with Darth Vader’s eyes, or even mount them in the mouth-piece.  Somehow I could maybe even work in that control panel…  If the speaker was in the mouth, I could make the eyeballs light up or something even crazier.  I can even use the integrated AC adapter, but I have read online that sometimes they produce an additional unwanted hum.

Then again, I thought trolling an antique store or two for an old box or transistor radio or crazy piece of kitsch would be kind of fun.  I might come across something that hits me as the perfect vessel for the Frankentwin.  (And a wooden box or old leather-covered transistor might sound better than yet another plastic enclosure.)

Fender Mini-Twin MT-10

HELP ME!

I pulled the amp apart with ease… I’m sort of stuck with the knobs.  They’re not coming off with a gentle pull, and while other goofy replacements might be fun, I don’t really want to bust these (or the circuit board inside) yet.  I guess I’m going to have to try to get something thin in behind them to pull them off.

The world of cigar-box guitar & amp building & case-mod type hacks is neat.  There are a ton of mini/travel amps out there, why not make one that’s all mine?  (Check out this coffin-shaped mini amp, this one from a mint container & this cracker-box amp!)

I’m asking you the reader if you have any tips, tricks, advice, suggestions, etc.  Have you done this before?  Have you seen anything similar?  Have you ever had the urge to build your own amp?  Would you buy one if I learned how to make a circuit & started making/selling weird stuff?  (Provided it sounded cool?)

Inspiration from Hoke·E·Geez (My new ‘New York Pro’ Strat copy)


So, I bought a guitar this past Saturday.  I wasn’t looking for a guitar.  This guitar was looking for me.

Hoke·E·Geez | INDOOR FLEA MARKET · CRAFTS

...and SO MUCH MORE.

Some of my extended family had rented out the lodge at our church camp for the weekend.  My cousin & I were out killing time and exploring while the ladies stayed in for their main objective; scrapbooking.  When in the area with time on my hands, a trip to Hoke·E·Geez is an absolute must.  It’s located right on Route 30 in Bedford PA by the Sheetz(Sheetz is a good bright red & yellow landmark, right?)

In what was once (perhaps obviously for people my age and older) an Ames department store, rests the one of the craziest/coolest places I have ever been.  My first trip there was in search of antiques… I collect old Coca~Cola & other glass bottles.  I had no idea what I was in for.  Hoke·E·Geez is full of …Everything. 

Stuffed Squirrel on display (& for sale!) at Hoke·E·Geez (Bedford, PA)

"Help! I'm not dead! Some redneck just stapled my nuts to this driftwood!"

It’s got crafts, antiques (from old pop bottles to the machines), furniture, a weird leather biker-jacket section, a hardware section like someone emptied a Harbor Freight in 1978 and dumped it there, of records, new stuff made to look old (think the store in Cracker Barrel), toys, tools, books, records, a section chock full of cassette tapes (mostly hair metal), musical instruments of all varieties, a stuffed squirrel that my cousin photographed with his phone, nunchucks, swords, toilets, knives, flooring, gun parts, cabinetry, pistol crossbows, stuff you’d see in a thrift store or at a garage sale, a Weinermobile pedal car, … and other scattered oddities/treasures.

Yeah, I said musical instruments.  Of course, I flock nearly immediately to the old guitars.  Hoke-E-Geez also serves as an aged acoustic graveyard.  They have several dried out yet beautiful acoustics ravaged by time & strings that pull the neck past the point of no return. They would be great as decorations, or for this…

Guiar Fail | Acoustic Guitar Recycling

Guiar Fail | Acoustic Guitar Recycling

There I Fixed It | First Smash, Then Season

There I Fixed It | First Smash, Then Season

In fact, if I ever find one for the right price, it might make a cool antique bottle shelf… with some glass shelves & a light or 2.

Back to the story at hand though…  There we are strolling through the wonderland that is Hoke·E·Geez, like a bee doing its “tell the others where the honey is” dance. We were exclaiming “Woah!”, “Look at that!”, or “What is that?” with each erratic hop to the next section.

Toy Accordion (or Button Box?)

I can already play "Iron Man" and "Happy Birthday" (very poorly).

The first beauty I spied was this toy accordion for $12 and change.  It seems ridiculous and awesome.  Maybe I’ve seen The Bloody Seamen one too many times lately.  Looking online, it seems to be a fair price… and not difficult to master. I’m not sure of the name brand.  I have no idea if it’s a Hohner, Schylling, Barcelona, First Act, or something else.  I have found a bunch online that look similar.  This doesn’t match the colors of any others exactly, and of course it has no brand/name/logo in it.  Also, it appears that I have been shorted a book.  Also, is this really an accordion, or is it just a button box?  What’s the difference?  Are the butterfly-like designs up top too girly?

The next thing of interest that I saw was this beautiful New York Pro Strat knockoff…

New York Pro - Natural Finish Strat Copy
“Psst… you, yeah you… buy me. Yeah. I know I’m not a goofy guitar, but you need me. Look at my woodgrain. It’s not fancy or elegant, it’s just ‘there’. Buy me. I probably have really crappy electronics and hardware. Buy me. I bet no one has ever heard of ‘New York Pro’ or knows where we’re made. Buy me!
New York Pro - Strat Copy

New York Pro - Strat Copy

Well, the photo to the left is the photo that I sent to my wife along with the price, asking (only half kidding) if I should buy it.  There was some other black no-name Strat copy behind it.  The body on that black POS wasn’t nearly as solid, hefty,  or well-cut.

My cousin pointed it out I believe, & remarked on the natural finish.  I was stuck drooling over the $95 price tag since the neck was straight, there were no cracks, and it was nice solid body.  This was about the time we got into a conversation with a local cat who was into weird guitars and punk rock… and actually in a punk rock band up that way.  I can’t remember the name of the band.  I need to pop stuff like that into my phone.  The guy stopped & asked if I really had an accordion in the box marked “Accordion”.  I showed it to him & he’s the one that remarked that it was a button box & not an accordion.  After talking forever about weird guitars, rocking out, and goofy venues… we moved on.  He mentioned that there were other guitars “over there” pointing to a little music store-like area within the hallowed walls of Hoke·E·Geez.

This is where we happened upon some beast, made by a local cat that goes by Merle Kegg or Merle R. Kegg.  One of his custom-built axes had the letters “M R K” on the headstock.  The first one I spotted was a doubleneck… one 6 string guitar & one mandolin neck.  Yeah.  You read that right.

Merle R. Kegg - Guitar/Mandolin Doubleneck

Merle R. Kegg - Guitar/Mandolin Doubleneck

I apologize for the horrible quality cell phone photos, but I’m sure you get the point.  I find it an odd placement for the pickups… but then again some people like that neck pickup sound.  I generally stick as close to the bridge as possible.  The custom cases are pretty cool.  Then I came upon this one…

Merle R. Kegg - White Guitar

Merle R. Kegg - White Guitar

It caught my eye, and I believe the price was only $64 or $65… but I didn’t even take it out of the case once I got a closer look.  If there was a Regretsy-like site for homemade guitars, this may top them all.  I mean, I love the shape… and I respect the intent and the labor that went into this beast, but… wow.  The placement of the bridge directly up the neck’s ass is crazy.  The pickguard looks like flooring or wall tile.  I’m hoping this cat is Amish or 97 years old or has 7 fingers total or something.  I hate to be so harsh, but when I think a guitar is ugly, we have a problem on our hands.  There was no attempt to smooth out the edges or anything… the paint is applied like it’s the side of an outdoor shed… not a guitar.  Wow.  I’d like to see more of his work, maybe these were the odd ones out.  If you know anything more about his work, please post in the comments!  There were some other cool guitars (not made by Merle), ukuleles, mandolins & other stuff in that section.

I still hadn’t received a reply from the wife.  I got the accordion, my cousin picked up a few things, and off we went.

When we got back to camp, I asked my wife if she had seen the text with the photo.  She hadn’t.  She checked it out & liked it.  She asked that if I got it I could place it on the stand in the living room instead of my Batman Logo guitar.  She liked the wood (which I have since come to learn is mahogany).  We talked it over and she suggested that I go get it.  I told her it would need new guts, but she was still behind the idea.  After lunch, my cousin went to a nearby farm to hunt coyotes, and I went back to Hoke·E·Geez to hunt that guitar.

I came back with my prize:

New York Pro - Stratocaster Copy

New York Pro - Stratocaster Copy

I also managed to stop by the Bedford Banjo Shop.  It was small but very cool and reasonably priced in there.  They had banjos, guitars, ukuleles, mandolins, & more.  They were also very friendly and quite busy.  I tried to stop by another store nearby, but they were closed as it was after 2:00pm.

I have plans for this guitar… GFS Lil Killer rail pickups, some wooden knobs, a leopard-print pickguard, black hardware (& bridge & tuners), and I guess a leopard-print strap.  As soon as I put away some money, I hope to get all this stuff & have it all set up nice & pretty.  My go-to guitar guy has been Aaron at Lawrence Music lately.  He helped set up the Batman Logo guitar… and dropped in my Seymour Duncans.

Oh what I'm gonna do to this guitar...

Oh what I'm gonna do to this guitar...

You didn’t think I’d leave it alone did you?  It needs something in order to fit in with my other guitars.

I’m still at a loss with any concrete information about the New York Pro brand.  I’m not sure if it’s pumped out of a Chinese factory that puts many different brands on the same guitars?  They do have an odd cut in the top of the headstock that seems to be on every NY Pro guitar I’ve seen online.  I’ve seen them as kit guitars, for $99, for $149.99 and for $279.95.  Maybe they’re made by Galaxy Guitars and the same as their Starfire line?  It looks like they might call it the “Galaxy New York Pro Star Gazer”.  They may be distributed by Lou Capece.  I may have to write to them for more information.

If you have any comments/stories about Hoke·E·Geez, any information about the accordion/button box, any info on that other guitar store in Bedford, any information about the New York Pro brand, or any comments/suggestions about my plans for the guitar… I’d love to hear ‘em!  Please share in the comments below!

Are you spamminators? Are you real? Have you clicked “like” or followed my blog?


Well, I’ve been blogging for a while now, and I enjoy the “stats” quite a bit.  (I love the search terms that lead people here.)  Lately I’ve been seeing the number of reads, likes, and followers go up… but the comments are staying about the same.  I also wonder if the people following & clicking the “★ Like” button actually like my posts, or if they’re just web-bots, or looking for links back to their own blog.

English: The logo of the blogging software Wor...

WordPress

I do a lot of my following with Google Reader, not on WordPressGoogle seems to do a better job of handling non-WordPress blogs in with the WordPress blogs.  The only problem is that my +1‘s or ‘s or probably don’t get back to WordPress authors (or other blog authors) as likes.

Image representing Google Reader as depicted i...

Google Reader

Have you recently followed me?

Have you recently “liked” one of my posts?

Leave a comment and let me know why you liked the post or why you followed my blog.  How did you find me?  Tell me something about yourself.  I’d really appreciate the feedback!  Not that I don’t already appreciate the likes & the follows… but it may even help me post more content that people actually enjoy.