One-Stuck Can Opener

Posted on by Standard

I have a problem.  The problem is the One-Touch Can Opener.  It’s a rather expensive useless plastic & metal rock.  In fact, they ought to market it as “Pet Rock: With Batteries!”  Maybe an actual rock would be more dependable in opening cans.  We just recently bought our 2nd One-Touch Can Opener.  I have no idea why we’re on a second one.

The first one was fine for a while, but it didn’t get much use unless we were making Nine Can Vegetable Soup or Chili or something where we had to open a bunch of cans at once.  One day a lid got stuck.  The can lid was successfully removed from the can, but remained under the blade of the One Touch.  It remained securely under the blade.  It wouldn’t come out with a gentle pull, or a labored tug.  Pressing the button to try & turn it back on didn’t do anything.  I think I eventually got some pliers to yank it out.  After that (of course) it ceased working.  Perhaps I yanked too hard?

Figuring it was my fault and that I broke it… I bought another.  I thought that the lid getting stuck was a fluke & it didn’t occur to me that it may (would?) happen again.  Boy, was I naive.  It happened again.  This time I didn’t try to dislodge the lid.  I have tried pressing the button.  I gave it several touches, to no avail.  I set it down & took some photos… intending to write to the manufacturer wight a verbose ranting “WTF?” kind of letter.  (You know, my usual.)  The problem being that I couldn’t find the damn manufacturer.

One Touch Can Opener - with Stuck Lid

What a wonderful piece of engineering! What excellent modern technology! I mean… What a blunder of engineering! What excrement passes for modern technology?

One Touch Can Opener - with Stuck Lid (Closeup)

What a grip!

English: A typical "As seen on TV" l...

Unless you were watching another channel.

I mean, I have some pretty cool photos to send, and I had no idea where to send them.  Googling One Touch Can Opener brings up several “As seen on TV” websites.

I emailed one of them, and they basically told me to go fornicate with myself…

From: As Seen On TV Customer Service
To: _____________@_____.___
Sent: Thursday, May 24, 2012 11:50 AM
Subject: One Touch Can Opener [Incident: 120523-000134]

Recently you requested personal assistance from our on-line support center. Below is a summary of your request and our response.

If this issue is not resolved to your satisfaction, you may reopen it within the next 7 days.

Thank you for allowing us to be of service to you.

Subject
—————————————————————
One Touch Can Opener

Discussion Thread
—————————————————————
Response Via Email (Allana) – 05/24/2012 08:50 AM

Dear Eric,

Thank you for your email. We are sorry to inform you that we do not have the referral contact information you seek. Please feel free to do a general web search for more information.

Sorry for any inconvenience this may cause you.

Best regards,

Allana
Customer Care Center

Customer By Web Form (Eric Carroll) – 05/23/2012

Hello, can you put me in touch with the manufacturer of the one-touch can opener?  (Email or mailing address preferred.)

I’m having problems with my 2nd one now.  It’s terrible.  The lids keep getting stuck.

https://www.asseenontv.com/one-touch-can-opener/detail.php?p=296306

Thank you,
-Eric

Question Reference #120523-000134
—————————————————————
Category Level 1: Product inquiry
Date Created: 05/23/2012 09:13 AM
Last Updated: 05/24/2012 08:50 AM
Status: Solved
Order Number:

[—001:001194:41928—]

Beans!

It’s great for sitting on top of cans & doing nothing until you press the button 4 times & have 2 false starts. (Photo credit: Carol Browne)

What helpful chaps who stand behind the products they sell!

Taking Allana’s wonderful advice I tried to Google One-Touch Can Opener Manufacturer.  As you can see, there are several possible foreign manufacturing services for this tiny incredible modern convenience.  I think I have it narrowed down though, to the correct one… It appears that Daka manufactures all of the One-Touch Products.

So, I sent them an email:

From: Eric Carroll <____________@_____.___>
To: “USA@onetouchproducts.com” <USA@onetouchproducts.com>; “info@daka.com.hk” <info@daka.com.hk>; “info@onetouchproducts.com” <info@onetouchproducts.com>; “Customerservice@cricketholdings.com” <Customerservice@cricketholdings.com>
Sent: Friday, May 25, 2012
Subject: One-Stuck Can Opener

Ciao Can Conquerors!

I’m writing to you today with an issue that you must have encountered before.  I’m currently on my second One-Touch Can Opener… and it has been incapacitated by a stuck lid.  Please see the attached pictures to literally illustrate my predicament.  As you can see, the lid is still securely in the grasp of the One-Touch Can Opener.  This is not the first time that this has happened to me with this unit.  Sometimes I am able to persuade the can opener to relinquish the lid after an extra press of the button.  This time, all the extra touching is not working.  Right now I am left with what amounts to an expensive plastic and metal rock with batteries on my kitchen counter.  This can-opener-come-rock currently has no purpose (other than annoying me each time I see it).  I have only had it for a month or two.  It has fresh batteries.  Prior to it being rendered useless, it did not get much use.

I had previously owned a One-Touch can opener that eventually encountered the same problem.  I was able to look past the fact that the product named One-Touch took several touches (after many many false starts) to operate.  I was able to handle the fact that would occasionally cut tiny ribbons of the can label and drop it into my food.  The scraps were generally easy to find and pick out.  I was able to accept that it would occasionally tumble off of a can when finished removing the lid, possibly also knocking over the can in the process.  It was still a time saver when making things like my award-winning chili or my easy comfort-food nine can vegetable soup.  (Although, were I a betting man… I would place money on me being faster at opening a can with a P-38 army can opener.)

I had assumed that when I tried to forcibly remove the lid from my first One-Touch can opener I possibly broke something.  It no longer responded to my touch.  I checked the batteries.  I tried different-sized cans.  I tried to use the Force. (I tried the light side at first, and eventually the dark side.  Anger does lead to hate, just like Yoda said.  Hate also eventually led to my wallet suffering.)  All of my peaceful attempts were to no avail.  Perhaps using pliers to savagely pry the lid from the mighty grip of the mindless One-Touch was a bad idea.  I had chalked it up to me being an idiot, and resigned to just purchase a new one.

I did purchase a new one, from Bed Bath & Beyond I believe, and we have arrived at the situation which I presented at the beginning of this email.  I am left with the stuck can lid and useless One-Touch can opener in the attached photos.

I’m not exactly sure what my end game is here.  My plan was to write to you to inform you of the situation, see if there were others who have encountered the same problem, and see what you may offer as a solution.  I would say that acceptable courses of action would include (but are not limited to) the following:

  • Advice as to how to properly get the One-Touch Can Opener to relinquish the can lid that it so dearly embraces.
  • A new improved functioning One-Touch (if that exists).
  • About $20 worth of U.S. Army issued P-38’s or other functioning non-electrical can openers.  I arrived at this figure for roughly (and I’m rounding down): $15 for the One-Touch and $5 for name-brand batteries.

Of course if you would like to offer a more agreeable recompensation, I’m open to suggestions.  I feel that I deserve at least something after two of your products have failed on me in rather rapid succession.  Surely you concur?  Most reasonable people would.

Thank you for your time and assistance.  I look forward to your reply and suggested resolution.  I’m anxious to remove the $20 plastic & metal decorative functionless One-Touch rock from my kitchen counter.

May the Force Be With You,
-Eric
.seitilibasid gninrael fo nuf ekam ot ynnuf ton yllaer s’tI

I hope I get some sort of response.  Until then, I will stick with my favorite can-opener: The P-38.  I will race a functioning One-Touch (if you can find one), and I will win.  It’s simple, small, and for the cost of one One-Touch I can get 50 of them from Ralph’s Army Surplus.  I’d even take a P-51, or an Australian FRED.  My grandma always kept a P-38 inside an old pill bottle in the drawer beside the silverware.  I learned to use that before I learned to cook, I think.

Size comparison of P-51 and P-38 openers

Size comparison of P-51 and P-38 openers (Photo credit: Wikipedia)

English: A can opener that incorporates a smal...

F.R.E.D. – Currently employed by the Australian Army and New Zealand Army in its ration kits. (Photo credit: Wikipedia)

What kind of can opener do you use?  There is a ridiculous amount of different types of can openers out there.  May I persuade you to not waste your time or money in purchasing a One-Touch?  You will most certainly have to touch it several times.  It’s false advertising.  I feel stupid for having to have purchased two of them before I realized that it was not operator error, but a terrible product.

Related Articles

15 thoughts on “One-Stuck Can Opener”

  1. My fiance has this can opener that opens the can on the sides around the can, giving it no sharp edges and can easily reseal the top of the can. It’s pretty cool and I prefer that… I also prefer all machines with a hand-crank

    Like

    Reply

    • I’ve Tweeted & fosted the following on FaceBook with my “lid stuck under the blade” photo. Perhaps OneTouchProducts will respond to the negative publicity on social media:

      #OneTouchProducts Canopener doesn’t work as seen on TV. Lid hangs up under blade. Manufacturer honor the guarantee! pic.twitter.com/XYmkJ7SmzE

      Perhaps if yu were to reTweet?

      Like

      Reply

        • Today I rec’d a mini can opener model #tc02 from amazon and have the same problem. Lid won’t release from opener. It was a small can like Rotel tomato/green chilies. Used pliers to remove, was not easy. So then I used on a can of spaghetti sauce, a regular size can. Same thing happened. Lid is still attached to opener. I will most likely return for money back tomorrow. This was meant for arthritic hands. You need a lot of strength in hands first to get to where the batteries are inserted. Used a paring knife to get there. I love the concept of this opener, I just wish it worked as advertised.

          Like

          Reply

  2. Pingback: Bed, Bath, Above & Beyond. Daka & One-Touch refuse to answer. | World (and Lunar) Domination

  3. I have a one touch that had the exact same problem and i was trying to google to find the manufacturer when I cam upon your article. Thank you for saving me a bunch of time and aggravation. You should know that the one touch used to look different and worked much better. It was longer…less plump looking. I had one of those and it died of old age. Then when I replaced it I got the newer shorter non working version. Probably a different entity bought the company and tried to make manufacturing it cheaper…and thus ruined what had been a decent product. I will get another can opener…although I really loved the damn thing when it worked.

    Like

    Reply

  4. Same problem here. I got one for my mother who is elderly and has problems trying to operate a manual can opener. Then this happened. Part of me suspected she didn’t lock it on properly to the top of the lid or something, but another part suspects that a second unit could just do the same any time. The unit is supposed to release the lid (I think) by retracting the blade at the end of the cycle and this part of the action seems to have ceased. Reset / Reverse button doesn’t seem to make any difference; it just won’t let the lid go. The store where I purchased the can opener are apparently all out of stock, so perhaps it’s simply meant-to-be that I look for an alternative automatic can opener.

    Like

    Reply

  5. Getting the can top off the opener is easy. First take the batters out to stop it from turning. Second cut the can top in to with a tin shear. Third replace the batters in the opener and let it run till it runs of the can top.

    Now let’s fix it. Put in a new set of batters and hold down the little bar next to the cutter head till the cutter head retracts. The cutter head retraction action uses more current then the rotation action so it stops retraction before it stops rotation action.

    Like

    Reply

  6. Having the same problem ( can opener will not detach from lid) ,but mine are at least 10 years old , I’m looking for a new one hopefully I’ll get another 10 years out of it

    Liked by 1 person

    Reply

Leave a comment